6/23/2023 0 Comments Asus m5a99fx pro r2.0 cpu led redDid you leave the cables from the older power supply in place? It sounds like you had a modular power supply, and you new power supply is also modular. Update: After switching to the cables provided with the PSU I am now able to boot. In any case, the original question still stands - how do you interpret the patterns? Who knows why? Unfortunately it looks like one SSD and one HDD were fried by dust shorts in the process - The SSD is not detected and the machine refuses to start if I connect the power plug to the HDD (I tried multiple cables). The 24+8 motherboard+CPU connectors are all connected. It should not be a power problem, since the new PSU has more wattage than the old one, and it's running the same hardware. That is, if I press it there's no beep, DRAM_LED light or fans running. If I attach any other cables to the PSU (SATA, GPU) the power button stays red but doesn't do anything. Having a reference for all of these would be extremely useful. I've tried pressing the MemOK! button with miscellaneous configurations of memory (1st, 2nd and 3rd slot), and sometimes get three blinks, sometimes two and sometimes one. DRAM_LED lights up three times then goes dark.the speaker plays a nerve-shattering single continuous beep.the power button on my ASUS P6X58D-E motherboard always stays red when power is on,.My specific issue is that after changing the PSU (the old one didn't die, but had a power button issue) to a Corsair AX760 and connecting only the CPU and 24 pin motherboard cables: I'll contact AMD and asus though, thanks for the help.What are the canonical meanings of the different DRAM_LED, power button and beep patterns prior to BIOS POST on Asus motherboards? My manual and miscellaneous web searches have turned up nothing but vague notions in forums. This current board has some mileage on it, (secondhand from someone else who treated it well) but it shouldn't be too serious. I had a working (but 4 EPU pin) PSU before that worked on my previous motherboard, it did not work on this one. You didn't mention, did the computer EVER run? or is this a new build? ![]() Obviously, if you can get it to boot with that PSU then the problem is your PSU. Just need know good power to see if you can get to the BIOS/Boot screen. At this point it doesn't even need to be the same power as the Golden Field. One last thing to try is to hook up a different psu one that is a known good, working unit. I would, as soon as able, contact manufactures. I have just checked the processor pins thoroughly (they're fine) and have done as you said for the thermal paste and there is no change, the same problem persists. However, reviews of it say that it is "all right in non-stressful environments" It's a 650W model. My PSU is the Golden Field ATX-S728 which I got locally but apparently is a PSU bought by a chinese company from other companies then rebranded. It is very rare, but we worked with another forum member this spring and summer and he did EVERYthing trying to track down a problem and finally AMD confirmed a bad CPU and did an RMA. Lastly, at least for now, there is a possibility that the CPU is defective. Can you provide the actual maker and model and the power it is supposed to deliver (Sticker on the side of the psu), please? It could be bad. Who makes that PSU? I have never heard of it. I use Arctic Silver 5, but there are lots of good versions available (see link): Too much TIM can be worse then none at all. The cooler and its bracket will spread the TIM adequately. My suggestion is do Not us as much TIM as is shown and don't spread it just place a drop about the size of a grain of rice in the middle of the CPU and attache the cooler. Follow this guide (with one small change that I will mention) and clean the CPU and cooler and again install with new TIM. Having the CPU fan on or off, plugged or unplugged does not make any difference.ġst, the cpu fan has to be connected or the board may not boot.Ģd Try removing the CPU again, and very carefully check for Any bent pins. I put thermal grease on the cpu top and spread it evenly across its surface, I don't think I got any on the sides. ![]() Did you connect the CPU fan and, if you just installed the CPU, did it have thermal interface material (TIM or Thermal grease) on it or did you put some on it? Are any of the fans spinning up?
0 Comments
Leave a Reply. |